设备名称：自动液压模架 Name: Automatic Hydraulic Mould Carrier 型号：HC-M2000/14型 Type: HC-M2000/14 数量：1台 QTY: 1 sets 电器控系统: 1套 Electric control system: 1 sets 设备技术参数明细/technique parameters list 模板锁紧面尺寸 2100mm*1400mm Plate size 2100mm*1400mm 闭合高度 300-900mm 可调 Height of Closing 300-900mm adjustable 开模角度 0-60° Upper plate tilting to open 0-60° 锁模力 200kn Closing force 200KN 开模力 70kn Opening force 70KN 下模板行程 200mm Lower plate stroke 200mm 开、闭模时间 12s Complete opening/closing time 12s 模具固定栓 DIN 650-18H12-(16) Tools fixation slots DIN 650-18H12-(16) 模具温度 50°-80° Mould temperature 50°-80° 控制电压 DC24V Control power DC24V 生产流程说明： Producing process: - 液压系统固定在地面上，驱动1台模架开闭动作 Hydraulic system is fixed on the floor, which is used to drive mould carrier opening and closing. - 锁模流程：整理模具-喷脱模剂-安全钩脱钩-合模-锁模缸启动锁模-液压缸顶出模架-闭模灌注-熟化-开模 Mould locking process: clean mould-spray release agent-safety hook release-close mould-cylinder start-closing inject-curing-open 灌注方式：闭模式灌注 Injection way: closing injection 控制操作系统：一套 Control system: 1 set 采用西门子公司PLC中央控制，OP操作系统具有强大的功能菜单，显示压力、时间、温控、生产参数设定、安全监控、警示等。 PLC adopts Germany SIMENS; touch screen has powerful menu function, which can display the pressure, time, temperature control, producing parameters, safety monitoring, alarm and so on. 模具加温设备：1台 Heating equipment: 1 set - 功率12KW*1台通过水循环分别给2套液压模具加温及温度控制 1 set of 12 kw cycle water to heat the mould and control the temperature. - 可分别实行独立温控 Control the temperature separately. 设备安全保护系统： Safety system: - 整套模架升降开闭由液压系统自动完成 The mould carrier’s lift, opening and closing are finished by hydraulic system. - 模架配有防脱落机械保险装置 Anti fall mechanical safety device. - 模具两侧装有红外线光栅安全感应器 There are red-ray barrier sensors on the both 2 sides of the mould carrier. - 设备设有急停及安全自动警示装置 Emergency stop and alarm system - 设备配有防护栏 The equipment has light barriers. 惠州市和成机械设备有限公司 188 9634 6260
